| Sweep speed |
Min.0.3s/sweep (used in fast sweep mode and 2PA mode) |
| Automatic search |
No,lf search points:Max.5 points(at event mode off), max.100points(atevent mode on)
Threshold(dB):0.05,0.1,0.3,1.0,3.0,5.0 |
| Optical return loss measurement |
Provided |
| Waveform function |
Displays 2 waveforms simultaneously |
| Smoothing function |
Improves the S/N ratil lf the wavform by 6 levels fromlevel 1 through lvevl 6 |
| Full trace display function |
Display the full measurement trace, measured by swtchingeach attenuator in turn |
| Relative distance measurement function |
Display distance relative to curaor setting |
| Event function |
Fiber length,total loss,transmission loss, return lossfor fiber on either side of splice piont |
| Procedure function |
Key command sequence is recorded and assigned to a singlekey for automatic execution |
| Built-in memory |
32 waveforms (store the setting conditions at the sametime) |
| Memory card |
Plug-in memory card,32/64/128/256/512KB(option) |
| Floppy disk^*1 |
Micro Floppy disk,storage capacity(MS-DOS^*2formatted), 2MB/1MB(1.44MB/720KB)or1.6MB/1MB(1.2MB/720KB) |
| Printer |
Hard copy of screen display is available byline thermalprinter |
| Title display |
20 characters*2 lines |
| Index of refraction(IOR) |
1.400000 to 1.699999(in 0.000001 steps) |
| Distance display units |
Meters,feet,miles |
| CRT |
6-inch,green |
| Interface |
GPIB |
Conforms to IEE-488 and IEEE-448.2
Device mode:SH1,AH1,T6,L4, SR1,R1,PP0,DC1,DT1,C0,E2
Controller mode:SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,C4,C7,E2 |
| Directplot |
Hard copy of the measurement screen to an external plotter/printeris available through GPIB |
| Power supply |
85 TO 132(170TO 250) Vac,50/60Hz ±5%≤160VA |
| Temperature and humidity^*3 |
-10°to +55°C(OPERATE),-20°to +60°C (storage),≤80 |
| Dimensions and mass |
284(W)*177(H)*450(D)mm,≤12.5kg(without plug-in units) |
| EMC^*4 |
EN55011:1991,Group1,Clas A
EN50082-1:1992 |
| Safety |
EN61010-1:1993(Installation CategoryⅡ,Pollution DegreeⅡ |
