高功率、可程序三相交流电源供应器_6315

产品特点

三相可程序输出
全系列采用脉宽调变(PWM)技术设计(Switching)
全范围可调输出电压及频率设定范围(0 ~ 300V, 45 ~ 500HZ)
4组大型LED显示器，可同时显示输出频率、电压、电流、功率/功率因数量测数值
在阻性负载下波形失真小于1%
超强输出波峰因子比可达3:1
内建8个程序记忆组，每组内含5个程序记忆步骤
可记忆独立的电压、频率及电流、功率、功率因子上下限设定"
可执行自动循环测试，最高可执行999900次
可依需求设定以秒 (sec)、分(min)、时(hour) 为测试执行时间单位
瞬时反应快，在瞬间加重载或除载时波形可于2msec内回复
特殊的恒流输出设计，可轻易激活马达、压缩机等高激活电流负载
全范围输出电压的稳压率可达0.5%
高激活负载能力，可激活额定输出容量3倍之电流而不作限制保护
高电力密度设计、体积小、重量轻
内建PLC遥控界面，可执行Test/Reset及P1,P2,P3三组程序记忆的遥控输出
输出过载、短路、过温度保护及警报
可内含输入功率因子改善线路(PFC)
前面板输入软件校正
前面板可输出小容量(15A)负载输出万用插座，适合各种被测物的电源插头
另可选购GPIB/RS232界面

技术参数

SPECIFICATIONS
MODEL			6303	6306	6309	6315	6330	6360	6390
INPUT
Phase			1￠		3￠
Voltage			230Vac±15%		220/380Vac±10%
Frequency			47-63Hz
OUTPUT
Power rating	Single-Phase Power		1KVA	2KVA	3KVA	5KVA	10KVA	20KVA	30KVA
	Total Power		3KVA	6KVA	9KVA	15KVA	30KVA	60KVA	90KVA
Max. Current (r.m.s)	0-150V		8.4A	16.8A	25.2A	42.0A	84.0A	168.0A	252.0A
	0-300V		4.2A	8.4A	12.6A	21.0A	42.0A	84.0A	126.0A
Phase			3￠/4W
Waveform Distortion			< 1% at 45-500Hz (Resistive Load)
Crest Factor			> 3
Line to Phase Regulation			± (0.5% of output +0.5V) at Resistive Load
Line to Line Regulation			± (1% of output +1V) at Resistive Load
Deviation of phase angle			120° < ±1° at Load Balance, 120° < ±2.5° at 100% Load Unbalance
Response Time			< 2 msec
SETTINGS
Voltage	PhaseRange		0-150V/0-300V Selectable
	Resolution		0.1V
	Accuracy		±(1% of setting + 2counts)
Frequency	Range		45-500Hz FullRange Adjust
	Resolution		0.1Hz at 45-99.9Hz , 1Hz at 100-500Hz
	Accuracy		±0.02% of setting
MEASUREMENT
Voltage	PhaseRange		0.0-300.0V
	LineRange		0.0-520.0V
	Resolution		0.1V
	Accuracy		± (1% of reading + 2counts)
Frequency	Range		0.0-500.0Hz
	Resolution		0.1Hz
	Accuracy		±0.1Hz
Current (r.m.s)	Range	L	0.000-3.500A			0.00-35.00A
		H	3.00-35.00A			30.00-350.0A
	Resolution	L	0.001A			0.01A
		H	0.01A			0.1A
	Accuracy	L	± (1% of reading +5counts)			± (1% of reading +2counts)
		H	± (1% of reading +1count)			± (1% of reading +1count)
Power	Range	L	0.0-350.0W			0.000-3.500KW
		H	300-4000W			3.00-40.00KW
	Resolution	L	0.1W			0.001KW
		H	1W			0.01KW
	Accuracy	L	± (1.5% of reading +5counts)			± (1.5% of reading +5counts)
		H	± (1.5% of reading +1count)			± (1.5% of reading +1count)
Power Factor	Range		0.000-1.000
	Resolution		0.001
	Accuracy		Calculated and displayed to three significant digits
GENERAL
PLC Remote			I/P：ON/OFF, P1, P2, P3, O/P：Processing
Memory			8 Memoies, 5steps per memory for Voltage, Frequency, Test Time, Delay time and Current, Power, Power Factor Hi, Lo Limit setting.
Timer			0=Continuous, 1-9999. (Unit: sec, minute, hour selectable)
Auto Loop Cycle			0=Continuous, OFF=Loop Once, 2~9999. (Unit:×1, ×10, ×100)
Auto Voltage Adjust			Enable it for improve voltage regulation within ±0.1V
Efficiency			≧80%(at Full Load )		≧85%(at Full Load )
Protection			Over Load , Short Circuit , Over Temperature
Calibration			Front Panel Calibration
Interface (Option)			GPIB/RS232
Environment			0-40℃/20-80%RH
Dimension (W×H×D) mm			430×729 ×650, 14U	430×729 ×650, 14U	600×818 ×900, 16U	600×818 ×900, 16U	600×952 ×900, 19U	600×1390 ×900, 28U	900×1725 ×1200, 35U
Net Weight			105Kg	120Kg	222Kg	290Kg	460Kg	760Kg	1200Kg
product specifications are subject to change without notice.